This is one of the fastest-handling 9mm 1911 pistols, yet it is also reliable and accurate. READ MORE
Bob Campbell
A few years ago, Ruger introduced a well-made and nicely-finished Government Model 1911 .45 ACP. The SR1911 has earned a reputation as an excellent value for its modest price. But Ruger did not stop there.
A few years later, Ruger introduced a Commander version. The standard Commander type — as currently manufactured by more than one maker — features a 0.75-inch shorter barrel than the 5-inch Government Model. The 4.25-inch barrel uses a standard barrel bushing. The frame is the same size as the Government Model. This all-steel handgun handles well and clears leather faster than the Government Model.
The Lightweight (LW) Commander is a Commander length 1911 with an aluminum frame. This results in a considerable weight savings. A LW Commander weighs 28 ounces versus 40 ounces for the Government Model. Each of these variants uses a standard 7- or 8-round 1911 magazine.
The Officer’s Style is an even shorter variant. This pistol features a 3.6 inch barrel and a shortened grip frame. The Officers Style is a truly compact 1911. Due to the short slide and differences in geometry, the barrel must tilt at a more severe angle. The result is the barrel bushing is eliminated and the barrel is a bull type that butts into the frame for lockup. This design often results in excellent accuracy.
The original Officer’s Model was developed for use by General Officers in the United States Army. Colt introduced commercial versions to compete with compact pistols such as the Star PD — an excellent design. Ruger’s offering, which they tagged “Officer’s Style,” is chambered in 9mm Luger, banking on the immense popularity of the cartridge.
The new Officers Style 9mm SR1911 is an attractive handgun. The slide is satin finished nickel. The slide features Novak combat sights with a three-dot outline. The slide lock, safety, magazine release, and beavertail safety are finished in black. The cocking serrations are the same unique slanted style used with the Ruger Commander.
The bushingless barrel is well fitted to the slide. A reverse plug caps off the recoil spring. The pistol features a stylish stepped slide that looks similar to the Browning P35, but it isn’t quite as sharply shouldered. The pistol doesn’t have a firing pin block or drop safety. Instead, it relies on a lightweight titanium firing pin and extra power firing pin spring for drop safety.
The frame is a dark gray hard anodized. The contrast with the slide is pleasing to the eye. The grips are among the best designed and feeling grips I have seen on a 1911. They are G10 material engraved with the Ruger logo. These thin grips allow the SR1911 Officers Model to maintain a low profile. I like the custom grade extended beavertail. This beavertail safety properly releases its hold on the trigger halfway into trigger compression.
The pistol is delivered with two, well-designed and well-finished magazines. Trigger compression is a crisp 5.0 pounds without any rough spots or creep and modest take-up.
During the initial work, I used a goodly amount of Winchester USA 115-grain FMJ ammunition. To test cycle reliability I also used the Winchester Defender 147-grain JHP loads. These loads have proven accurate and clean burning in a number of 9mm handguns. The Ruger 9mm was no exception.
I fired a box of each bullet weight without a single failure to feed, chamber, fire, or eject. There were no break-in malfunctions or short cycles. After this initial 150 rounds, I switched to the Winchester 124-grain PDX +P. This load demonstrates 1,200 fps in most pistols and just slightly less in the 3.6-inch barrel Officer’s Style.
This load offers excellent ballistics. This is a credible loading with good expansion and penetration. I fired these loads in rapid fire and the Ruger 9mm proved controllable, with well-centered groups at 7, 10, and 15 yards.
I field stripped and cleaned the pistol after the initial 260 rounds. There were no signs of eccentric wear. I returned to the range a few days later. To broaden the test I added a number of handloads using hard cast lead bullets. If the pistol isn’t reliable with cast lead bullets it may not have a place in my scheme of things. I also fired a number of Winchester’s 115-grain Silvertip, a popular load. I accuracy testing firing from a solid bench rest at 15 yards (in deference to the Ruger’s short barrel and sight radius). Accuracy was excellent as noted in the table below.
5-shot groups | 3-group average | 15 yards
Winchester 115-grain FMJ 2.0 inches
Winchester 124-grain PDX +P 1.7 inches
Winchester Silvertip 115-grain JHP 1.8 inches
The 9mm 1911 Officer’s Style pistol makes a lot of sense. This is a reliable, accurate, and controllable handgun. It is light enough for constant carry but heavy enough to control recoil. It rides close to the body but maintains a good firing grip.
I have carried my example with the Jeffrey Custom Leather EZ Carry for some weeks. This holster is a great inside the waistband holster but also offers the option of carrying the holster between the belt and the trousers. It is rigid enough for such use. This is a good kit, and the Ruger Officers Style is among the best carry guns to cross my desk in some time.
See more HERE